top of page
Jeff Rowland- Capri S2-SC Preamplifier
REQUIRES CONSULTATION - We believe that you should have quality products that fit your needs. For that reason, all of our products with a price of $4000 or more requires a brief consultation. We want to make sure this product is well matched to your current system and it reaches your expected result. 
CALL (404) 764-6233 to inquire.
 
Tailor made for 125 amplifiers. The Capri is the perfect little line stage with a big sound.
There is far too much that can be said about Rowland equipment beyond what you see.
One of the few great American Master HiFi Designers, Jeff Rowland is dedicated to excellence in every way.
 
MADE IN USA

Jeff Rowland- Capri S2-SC Preamplifier

$5,900.00Price
  • Overall Gain 14 dB
    Gain Range 99.5 dB, 199 Equal Increments
    Frequency Response 10 Hz – 350 kHz, -3 dB
    Phono Card (optional) Adjustable for simple load and gain adjustments for MM, high-output MC and MC cartridges
    Inputs 2 x Pair Balanced XLR, 1 x Pair Unbalanced (RCA) Unity Gain (Bypass), 2 x Pair Unbalanced RCA
    Outputs 1 x Pair Balanced Line Level, 1 x Pair Unbalanced Line Level
    Weight 9.5 lbs / 4.26 kg
    Dimensions 2.6”(H) x 13.7” (W) x 6.2” (D) / 6.7 cm (H)x 35 cm (W) x 15.7 cm (D)

  • Compact elegance

    Balanced preamplifier design housed inside a low profile, compact, ultra-low resonance, structurally rigid chassis that is precision-machined from solid blocks of aircraft grade 6061-T6 aluminum that is completely sealed for trouble-free operation and high RF and EMI isolation. Features an elegant front panel precision-machined and sculpted with a diamond tipped cutting tool.

    Universal power supply

    Low noise, high-current, dual regulated switch- mode auto sensing and auto ranging power supply provides Capri with optimum performance at any world-wide mains operating voltage.

    Thin-Film Resistors

    All resistors are low noise, 0.1% thin-film type for extremely low thermal noise which complement the low-noise characteristics of the active circuitry.

    Four-Layer Circuit Board

    All circuitry is populated on one side of a 4 layer circuit board to allow for continuous, unbroken, low impedance ground and power supply distribution planes. Care was taken to minimize signal path lengths and components sizes.

    Input transformer-Coupling and Isolation

    Transformer coupled input circuitry provides universal component compatibility and virtually eliminate ground loop noise and RFI/EMI. Transformer coupling ensures identical preamplifier overall gain when using unbalanced input adapters. Other benefits include ground noise isolation and excellent common mode noise rejection (CMRR) from all sources.

    I/O flexibility

    Dual low impedance line-level outputs (80 Ohms balanced, 40 Ohms unbalanced), 48 Ohms balanced and unbalanced inputs, and preamp bypass inputs allow unprecedented compatibility with audio and A/V components, while optional high quality phono cards are available for compatibility with vinyl sources.

    Remote control

    Six-function remote control transmitter display dim, adjusts volume, input selection, mute, phase, and channel balance.

    Precision volume adjustments

    Dual rate volume control allows precision level adjustments over nearly a 100 dB range. The volume control incorporates a permanently noiseless optical encoder that always maintain its tactile feel, accuracy, and channel balance at all settings. The optical encoder mounted behind the volume knob commands the attenuation level of a monolithic resistor attenuator over a 99.5 dB range in 0.5 dB increments.

    Optional Phono Cards

    Plug-in Standard phono cards (installed internally) converts Line Input 1 to high performance phono input. Three gain and loading options can accommodate moving magnet (MM), moving coil (MC), and high output moving coil cartridge types. OR the HP (High Performance) cards can be installed for a high performance MC with input transformer with many load options.

    Home Theater Bypass Adjustment

    The Home Theatre BYPASS RCA inputs can be changed to an additional set of standard inputs by placement of an internal jumper inside the unit.

    Display Off (5 Sec)

    An internal jumper will place the display in an automatic OFF condition after 5 seconds from any operational command and illuminates again for 5 seconds after additional commands are initiated.

    High-quality connectors

    All signal connectors are rhodium plated, copper jacks (RCA) and Neutrix silver plated contact (XLR), soldered directly to the circuit board for direct connection to the signal circuitry.

    Green technology

    Modest power consumption of mere 6 Watts permits constant power-up operation to eliminate warm-up time and maximize musical performance, and allows Capri to operate enclosed into an entertainment unit.

    IEC

    15 Amp female IEC AC power connector.

RELATED PRODUCT

bottom of page